column shift rod interchange?
Thread Starter
|
Posting Guru
Joined: Mar 2006
Posts: 1,182
Likes: 1
column shift rod interchange?
i'm working on putting my 65 F100's 3-speed shifter back on the tree where it belongs...unfortunately, the PO scrapped the shift rods.
i found a '75 in the junkyard, and got the rods.
any chance the '75 rods will work?
i found a '75 in the junkyard, and got the rods.
any chance the '75 rods will work?
Tuned
Joined: Feb 2009
Posts: 370
Likes: 0
From: Near Nashille, TN
You'll know better when you try them, but I think they'll probably work. I changed a 66 manual steer column to a 75 Power-steering column and (if I remember right), I used the original 66 rods. I do remember ordering the 75 bushings (at the column) from Rockauto.
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
C5TZ-7326-B .. 2nd/3rd Shift Rod / 16 5/8" long, 3/8" diameter / 6.27" rise / 5/16" -24 thread on one end.
C5TZ-7328-C .. 1st/Reverse Shift Rod / 19" long. 3/8" diameter / 4.53" rise / 5/16" -24 thread on one end.
Thread
Thread Starter
Forum
Replies
Last Post
redneck_davis
1967 - 1972 F-100 & Larger F-Series Trucks
6
Feb 25, 2019 10:27 PM
tumblindice
1961 - 1966 F-100 & Larger F-Series Trucks
3
Nov 5, 2018 10:47 PM
teched
1973 - 1979 F-100 & Larger F-Series Trucks
5
Apr 8, 2014 07:58 PM
teched
1973 - 1979 F-100 & Larger F-Series Trucks
1
Dec 29, 2013 05:48 PM
66_in_ky
1961 - 1966 F-100 & Larger F-Series Trucks
5
Dec 25, 2008 08:28 PM
