MY 1967 F-100 SHORT BED
#106
#107
#108
Before i post this pic, everyone needs to know that im no professional fabricator and i hate my Miller 175 welder. Its the most inconsistent welder ive ever used. One minute its perfect, stop to repossition and its trash.....
cut out my lower plates for the CV front, cut and rotated the bushings then installed the plates. They are gusseted under the frame then one on the outter. Over all im happy
cut out my lower plates for the CV front, cut and rotated the bushings then installed the plates. They are gusseted under the frame then one on the outter. Over all im happy
#112
#113
Saturday Drove 200 miles one way to watch my boy play college football. Never gets old seeing my boys do well in life. Up early this morning and back on the Bump. Finished making all my gussets and welding in the brackets. After that i D-A sanded the front with 80 grit, sprayed Por-15 metal etch and now the frame is Por-15 inside and out from the firewall forward
#116
#119
#120