In search of.....
Thread Starter
|
New User
Joined: Oct 2011
Posts: 24
Likes: 0
From: Dothan, Alabama
In search of.....
I am trying to locate a pair of step braces for the bed of my 66 short wheelbase Flareside. They are the ones that go beneath the step between the cab and fenders. (Just in case I have them named incorrectly.) Does anyone have or know where I might purchase a set? Any suppliers sell these?
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
I am trying to locate a pair 
of step braces for the bed of my 66 short wheelbase Flareside. They are the ones that go beneath the step between the cab and fenders.
Which side? Right (passenger) side different than left (drivers) side.
Does anyone have or know where I might purchase a set? Any suppliers sell these?
of step braces for the bed of my 66 short wheelbase Flareside. They are the ones that go beneath the step between the cab and fenders. Which side? Right (passenger) side different than left (drivers) side.
Does anyone have or know where I might purchase a set? Any suppliers sell these?
2) B7C-16462-A .. Right "L" shaped Running Board (step) Bracket (brace)-in front of rear fender / Obsolete
No Ford Dealer or obsolete parts vendor has any.
-----------------------------------------------
2) B7C-16463-A .. Left "L" shaped Running Board (step) Bracket (brace)-in front of rear fender / Obsolete
JST AUTOMOTIVE in Lebanon TN has 1 = 615-443-3086 / No Ford Dealer, no other obsolete parts vendor has any.
Mar-K (mar-k.com) located in OKC reproduces Flareside beds and individual parts for them.
Thread Starter
|
New User
Joined: Oct 2011
Posts: 24
Likes: 0
From: Dothan, Alabama
Thanks NumberDummy
I figured if anyone would know it would be you. I assumed the brackets could be bought in pairs. One for the right and one for the left. I could get by with just finding one for the right since the PO replaced the rusted out right one with angle iron. No pick and pulls in my area have Ford trucks of that vintage on their yards. Most have been crushed. I will try Mar-k and see if I can order one from them.
Thanks again for the info.
I figured if anyone would know it would be you. I assumed the brackets could be bought in pairs. One for the right and one for the left. I could get by with just finding one for the right since the PO replaced the rusted out right one with angle iron. No pick and pulls in my area have Ford trucks of that vintage on their yards. Most have been crushed. I will try Mar-k and see if I can order one from them.
Thanks again for the info.
Thread
Thread Starter
Forum
Replies
Last Post
crrnchris
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
7
Jul 1, 2017 09:07 PM
bigpoppav
1961 - 1966 F-100 & Larger F-Series Trucks
2
Oct 2, 2016 01:57 PM
