Need help... please. Front Suspension question
Thread Starter
|
New User
Joined: Aug 2012
Posts: 3
Likes: 0
Need help... please. Front Suspension question
I have a 01' F 150 4x4 supercrew 5.4. I was rebuilding my front end and did all ball joints and tierods and Pitman and idler. I got a new center link and wasn't paying attention and removed it with out noticing the orientation of how it was installed. Is there a certain way it needs to e installed. It had bends and turns. PLEASE PLEASE HRLP ME IM GOING INSANE !!!
Thread Starter
|
New User
Joined: Aug 2012
Posts: 3
Likes: 0
Hmmm wish i had a pic. I have one side that has a bens in it and the other onw is kind of straight.this sucks.my tie rods were way way way to long and the old ones are short way shorter...whats going on.
Fleet Mechanic
Joined: Jul 2010
Posts: 1,354
Likes: 31
From: Winnipeg
I would check with your parts supplier. They may have given you the wrong parts for a different model F150. Napa parts online show two different length tie rod ends 6" and 8.93". They also show two different length center links 27.06" oc and 32.37" oc.
I believe there's a standard F150 and a 7700 model. Someone else can confirm.
I believe there's a standard F150 and a 7700 model. Someone else can confirm.
Thread
Thread Starter
Forum
Replies
Last Post
Benchwrench
1999 - 2016 Super Duty
12
Sep 25, 2017 07:47 AM
