Ignition Problem
Thread Starter
|
New User
Joined: May 2003
Posts: 12
Likes: 0
Ignition Problem
a 1987 Ford Bronco Full size,the sympton was just like 10 years ago, when I changed the the ignition module on the Distributor and that did it , this time however this did not do,I also changed the E-core coil and still no spark,the engine turns but no spark to see, I removed the Engine control Module located on the firewall to read the part number and found out that is obsolete and Ford does not make this anymore (E7TF-2C018-AC).
Does anyone knows who rebuilds this engine computers?
If not what other options should I seek.
TFI & EEC-IV.
Thank you in advance
Does anyone knows who rebuilds this engine computers?
If not what other options should I seek.
TFI & EEC-IV.
Thank you in advance
Laughing Gas
Joined: Mar 2003
Posts: 877
Likes: 1
From: Colorado, U.S.A!
Ignition Problem
BTW, I'd check a few other things like wiring to and from the coil, to and from the ECU, etc. Also there are things in the distributor that can cause no spark. Got a manual?
