Front ends
Thread Starter
|
New User
Joined: Jul 2012
Posts: 7
Likes: 0
Front ends
I would like to do a front suspension swap on a 95 F250, to some thing that would rider better, or be a better set up. I plan on building a late forties, or early fifties cabover using the F250 chassis. What about air ride?
I don't plan on using it for heavy hauling. Max load would be about 6,000 lbs. Any sugestions?
I don't plan on using it for heavy hauling. Max load would be about 6,000 lbs. Any sugestions?
Thread Starter
|
New User
Joined: Jul 2012
Posts: 7
Likes: 0
Yep it's gets a little expensive. I have bilt about 6 street rods so I understand you pay a lot for some of the conversions. I want to use quality equipment, but I would also like to keep the expense down if I can. I don't have a real budget,but I'm not just going to start throwing money at it. I was wondering about a truck arm rear suspension in the rear. I have never used one.
Thread
Thread Starter
Forum
Replies
Last Post
DyceDesign
1948 - 1956 F1, F100 & Larger F-Series Trucks
7
Feb 1, 2008 08:33 PM
