When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hard to beat free. I've got no personal experience with it, but like Rick, I've always thought it was similar to kerosene. **** poor lubricity from what I've heard. If you've got any biodiesel available, I'd mix it with that and run it.
Yeah I would add some 2 stroke oil or just cut it with diesel 50/50 or 40/60 whatever, but you had better believe if i had 120 gallons of free fuel I would be running it!
Yeah I would add some 2 stroke oil or just cut it with diesel 50/50 or 40/60 whatever, but you had better believe if i had 120 gallons of free fuel I would be running it!
Damn skippy!
With my injectors in the state they are in, i'm even running UMO. haha.
Filtered of course.
It's a no no to do, but they need all the love they can get.
I've done that too. Ran some in the old motor. I knew I had bad injectors anyway, so I figured what the heck!? Why not? Filtered it down to 5 microns, let it settle and cut it with diesel. Ran pretty good on it in fairly high concentrations. Smoked and stunk a lot though. I can't bring myself to do that in this engine though. Good to know I can do it if I need to though... Never know when the Zombies might attack.
I run 50/50 atf filtered and run thru a magnet I also let it settle Down in the drum get it from work for free but filtration is key 5 microns is perfext