A/Os 1/2 ton axle rebuild and SASsy thread -with a pic or two
#46
07-19-2012, 07:25 PM
Post Fiend
To make Kris feel like an a hole.
A) I told you to get him over there before we did it
B) Fwak him, does he want to sit on the floor?
C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash.
<3 Paul
A) I told you to get him over there before we did it
B) Fwak him, does he want to sit on the floor?
C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash.
<3 Paul
#48
07-19-2012, 07:55 PM
To make Kris feel like an a hole.
I would never feel like an a-hole for causing you pain...bisch. BTW, did you use my welder last week?
A) I told you to get him over there before we did it - I agree but
he was over 1000 miles away at the time so I used our combined similar height to make a good measurement for seat height. I did not account for gunt as we do not have one.
B) Fwak him, does he want to sit on the floor? Apparently
C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash. Probably not
<3 Paul
I would never feel like an a-hole for causing you pain...bisch. BTW, did you use my welder last week?
A) I told you to get him over there before we did it - I agree but
he was over 1000 miles away at the time so I used our combined similar height to make a good measurement for seat height. I did not account for gunt as we do not have one.
B) Fwak him, does he want to sit on the floor? Apparently
C) The tube is 1.5 and the stub is 1.5 ... he wants the seats on the floor. He won't be able to see over the dash. Probably not
<3 Paul
#49
07-19-2012, 10:28 PM
Post Fiend
#51
07-20-2012, 08:28 PM
#54
07-30-2012, 04:55 PM
#55
07-30-2012, 09:31 PM
Post Fiend
#57
07-31-2012, 07:07 PM
Join Date: Mar 2005
Location: Marlboro Mental Hospital.
Posts: 60,990
Received 3,108 Likes
on
2,168 Posts
#58
07-31-2012, 07:09 PM
#59
08-05-2012, 09:28 PM
Mo' junque.
Made a little bracket to help hold the 3g alternator. Im using a piece of 3/8 all thread back to a hole in the 302 block. On 460s the holes at the front are 7/16" so I havent needed to do this before.
6ga wire and 175 amp mega fuse
Made a little bracket for the MSD 6al digital. The center tunnel didnt really offer an easy mounting position otherwise.
Not sure how many of you have ever seen the Ballistic forged poly bushings in person but DAMN!! These things are nice - especially for ~$50 ea including the jamb nut and tube adapter. Im using the 1" shank 5/8" through bolt for the front link in a set of ladder type traction bars. At the rear Im cutting 3" pieces of 2x.250 DOM and using poly Chebby leaf spring bushings to make my own deal.
Made a little bracket to help hold the 3g alternator. Im using a piece of 3/8 all thread back to a hole in the 302 block. On 460s the holes at the front are 7/16" so I havent needed to do this before.
6ga wire and 175 amp mega fuse
Made a little bracket for the MSD 6al digital. The center tunnel didnt really offer an easy mounting position otherwise.
Not sure how many of you have ever seen the Ballistic forged poly bushings in person but DAMN!! These things are nice - especially for ~$50 ea including the jamb nut and tube adapter. Im using the 1" shank 5/8" through bolt for the front link in a set of ladder type traction bars. At the rear Im cutting 3" pieces of 2x.250 DOM and using poly Chebby leaf spring bushings to make my own deal.