VIN Decode Help
Laughing Gas
Joined: Dec 2010
Posts: 1,091
Likes: 14
From: Tucson, Arizona
Here's your decode - F10 = 2 wheel drive truck. A = 240 cubic inch I-6, 1 bbl engine, P = built in Twin Cities, MN. 775601 = built in Nov, '65 as a '66 model year vehicle. 129 = wheelbase in inches. W = medium blue exterior paint color. F100 = 5000 pound GVW half ton truck. 281 = Standard Cab with Medium Blue Crush Vinyl and Medium Blue Wicker Pattern Vinyl upholstery. 5000 = your maximum gross vehicle weight. 129 @ 4000 = your engines maximum NET horsepower and the rpms where it is achieved. 441034 = Domestic Special Order from the Twin Cities District Sales Office. Your truck was special ordered, not just bought off the lot. Hope this helps!
Thread Starter
|
New User
Joined: May 2012
Posts: 7
Likes: 0
From: New Brighton, MN
That helps immensely! I had no idea what the year is, and have now been schooled.
I found it interesting that the truck was special ordered. Hasn't made it too far away from the Ford plant since it was made (still near the twin cities)...
I found it interesting that the truck was special ordered. Hasn't made it too far away from the Ford plant since it was made (still near the twin cities)...
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 787
From: Simi Valley, CA
44 = Twin Cities Ford District Sales Office, where the original selling dealer ordered the truck from
1034 = Domestic Special Order number. Something was installed on the truck by the original purchasers request that was not an RPO (Regular Production Order). This could have been a special body for one example.
Another is non standard paint color(s), but this doesn't apply here.
Since there would not have been any parts catalog reference for the special equipment, if parts were needed, the dealer contacts Ford, passes along the DSO.
Ford looks up the order number, then tells the dealer where the parts could be found.
This same system is still used today.
1034 = Domestic Special Order number. Something was installed on the truck by the original purchasers request that was not an RPO (Regular Production Order). This could have been a special body for one example.
Another is non standard paint color(s), but this doesn't apply here.
Since there would not have been any parts catalog reference for the special equipment, if parts were needed, the dealer contacts Ford, passes along the DSO.
Ford looks up the order number, then tells the dealer where the parts could be found.
This same system is still used today.
Thread
Thread Starter
Forum
Replies
Last Post
rsh1966
1961 - 1966 F-100 & Larger F-Series Trucks
3
Aug 14, 2018 06:27 AM
Pacecar1986
1957 - 1960 F100 & Larger F-Series Trucks
5
Jan 2, 2017 05:56 PM
BCTom
1973 - 1979 F-100 & Larger F-Series Trucks
5
Nov 13, 2006 07:07 PM
66MercMan
1961 - 1966 F-100 & Larger F-Series Trucks
3
Jun 18, 2003 03:32 PM
