Progress Update
Thread Starter
|
Lead Driver
Joined: Aug 2002
Posts: 6,682
Likes: 12
From: Saskatoon SK Canada
Progress Update
I have finished drilling the holes for the rear spring hangers and is currently working on the article. There won't be to many pictures since I didn't have the camera at the time. I'm 1 mm off on the front and 2 mm off on the rear.
Have I confused you guys?
10 mm = 1 cm
10 cm = 1 dm
10 dm = 1 m
10 m = 1 dam
10 dam = 1 h
10 h = 1 k
I think I got the dam and h right we don't use those too much. These are abreviations.
2.75 cm = 1 inch
2 mm = 1/16
That is the lesson for today. Tomorrow we will deal with liquids and then weight.
Have I confused you guys?
10 mm = 1 cm
10 cm = 1 dm
10 dm = 1 m
10 m = 1 dam
10 dam = 1 h
10 h = 1 k
I think I got the dam and h right we don't use those too much. These are abreviations.
2.75 cm = 1 inch
2 mm = 1/16
That is the lesson for today. Tomorrow we will deal with liquids and then weight.
