A/C questions
Thread Starter
|
New User
Joined: Apr 2003
Posts: 3
Likes: 0
A/C questions
I'm trying to check the pressure on my A/c and want to make sure I am using the right port. I think it is the one on the passenger side on top of the evaporator. Is that right? THe is also a port by the battery that reads evap service port PSI maximum ... But I was told that I was not to mess with the port on the drivers side.
heres a pic of my engine and I circled the spot where I think I should my homepage
heres a pic of my engine and I circled the spot where I think I should my homepage
New User
Joined: Apr 2003
Posts: 6
Likes: 0
A/C questions
You want to check the pressure on the low side of the compressor. To locate that there are 2 lines/hoses connected to the compressor. The low side it the fatter of the 2 lines. Follow that line back until you find the charging port. This is where you want to check the pressure.
Thread
Thread Starter
Forum
Replies
Last Post
72f100(460)
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
1
Jan 28, 2006 11:37 AM
04XL4x4RC
1973 - 1979 F-100 & Larger F-Series Trucks
2
Aug 11, 2005 04:17 PM
