broken motor mount...
Thread Starter
|
Freshman User
Joined: Mar 2003
Posts: 34
Likes: 0
From: West Coast
broken motor mount...
Anyone have any tips on replacing my driver side motor mount... I tried yesterday to just loosen one side and push the motor up with a floor jack.. this did not go over so well as i could not get the motor to move at all....
also how on earth did you guys get the forward bolt off the motor... the first two were pretty easy to get at with a socket and a u joint... but that last one was a bugger with a wrench...
thanks
nick
also how on earth did you guys get the forward bolt off the motor... the first two were pretty easy to get at with a socket and a u joint... but that last one was a bugger with a wrench...
thanks
nick
Senior User
Joined: Aug 2000
Posts: 473
Likes: 1
From: Richmond, CA
broken motor mount...
Try unbolting the other mount so that the engine will be able to move better. You may not have to take the other mount off the block, unless it too is bad, but you might also try using a hoist.
Hope this helps.
Hope this helps.
