Ford Truck Enthusiasts Forums
Misc.
Clutch, Transmission, Differential, Axle & Transfer Case
Tip on Changing Tranny Filter?

Tip on Changing Tranny Filter?

Reply Subscribe

Search this Thread

Old

Apr 16, 2003 | 02:31 PM

#1

jukelemon

Thread Starter

|

Freshman User

Joined: Dec 2001

Posts: 29

Likes: 0

From: Lexington, KY

Tip on Changing Tranny Filter?

I am about to change my tranny filter on my 96 150 4x4. Last time I changed it, I took off the tranny, supported the tranny with a jack just so I could get to those two bolts closest to the tranny mount. My manual gives no such hints as to this or anything else to make this easier.

Any suggestions?

Thanks.

Reply

Old

Apr 16, 2003 | 02:33 PM

#2

jukelemon

Thread Starter

|

Freshman User

Joined: Dec 2001

Posts: 29

Likes: 0

From: Lexington, KY

Tip on Changing Tranny Filter?

Sorry, meant to say tranny mount there instead or tranny. That would have been cutting of your face to spite your nose.

Reply

Old

Apr 16, 2003 | 04:41 PM

#3

AggiePSD

Elder User

Joined: Apr 2002

Posts: 541

Likes: 0

From: Victoria, Texas

Tip on Changing Tranny Filter?

What do you need to unbolt the tranny mount for? Usually you just remove the pan and then remove the filter and then reinstall.

Reply

Old

Apr 17, 2003 | 08:18 AM

#4

jukelemon

Thread Starter

|

Freshman User

Joined: Dec 2001

Posts: 29

Likes: 0

From: Lexington, KY

Tip on Changing Tranny Filter?

I have 14 bolts on my pan. Two of them are directly over the tranny mount/cross member. There is no easy way to get those two bolts off i.e. I was hoping that someone had luck with an extension/swivel set up on their ratchet. You can not get to them with any type of regular tool.

Thanks for the reply.

Reply

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 09:02 PM.