Transmission work
Thread Starter
|
Posting Guru
Joined: Sep 2008
Posts: 2,379
Likes: 2
Transmission work
Hi everyone in Colorado.
Well I am moving on to another chapter in my truck. I am looking at a new transmission and rear end. For the transmission I am going to get an old E4OD from a junk yard to replace the one I have. But I have a lot of performance parts that I want to be put into the new tranny. Essentially I want to get it rebuilt with these performance parts.
So I am looking for suggestions of places where I can take a use tranny with these parts I have for it and have it rebuilt (I live in Colorado Springs but I work in Denver, would prefer to find someone on the Springs but am not opposed to Denver).
Anyone have a place they would recommend?
Well I am moving on to another chapter in my truck. I am looking at a new transmission and rear end. For the transmission I am going to get an old E4OD from a junk yard to replace the one I have. But I have a lot of performance parts that I want to be put into the new tranny. Essentially I want to get it rebuilt with these performance parts.
So I am looking for suggestions of places where I can take a use tranny with these parts I have for it and have it rebuilt (I live in Colorado Springs but I work in Denver, would prefer to find someone on the Springs but am not opposed to Denver).
Anyone have a place they would recommend?
Cargo Master
Joined: Apr 2004
Posts: 2,574
Likes: 4
From: Golden, CO
Walk into the service department at CSU and ask for Larry Hull. Larry has nearly 30 years experience, many of them as a dealership mechanic, and transmission specialist.
I've know Larry for about five years. He is a straight shooter, and likes to provide the kind of service that earns customer loyalty.
He works here: Used Cars and Used Trucks Dealer in Colorado Springs | Used Ford| Used Nissan| Used GMC| Used Jeep| Used Dodge| Used Chevy| Used
You can also find him here: Well....................... - Rocky Mountain Ford Truck Club (RMFTC) Forums
I've know Larry for about five years. He is a straight shooter, and likes to provide the kind of service that earns customer loyalty.
He works here: Used Cars and Used Trucks Dealer in Colorado Springs | Used Ford| Used Nissan| Used GMC| Used Jeep| Used Dodge| Used Chevy| Used
You can also find him here: Well....................... - Rocky Mountain Ford Truck Club (RMFTC) Forums
Thread Starter
|
Posting Guru
Joined: Sep 2008
Posts: 2,379
Likes: 2
Walk into the service department at CSU and ask for Larry Hull. Larry has nearly 30 years experience, many of them as a dealership mechanic, and transmission specialist.
I've know Larry for about five years. He is a straight shooter, and likes to provide the kind of service that earns customer loyalty.
He works here: Used Cars and Used Trucks Dealer in Colorado Springs | Used Ford| Used Nissan| Used GMC| Used Jeep| Used Dodge| Used Chevy| Used
You can also find him here: Well....................... - Rocky Mountain Ford Truck Club (RMFTC) Forums
I've know Larry for about five years. He is a straight shooter, and likes to provide the kind of service that earns customer loyalty.
He works here: Used Cars and Used Trucks Dealer in Colorado Springs | Used Ford| Used Nissan| Used GMC| Used Jeep| Used Dodge| Used Chevy| Used
You can also find him here: Well....................... - Rocky Mountain Ford Truck Club (RMFTC) Forums
I am just about at the point where I need to focus on my tranny, should I go into Larry's workplace and talk to him about this? I guess I am not sure if he would be doing this as part of that business or on the side, so I am not sure how to approach. Also, do you know if he works on Saturday's?
Mountain Pass
Joined: Jun 2011
Posts: 225
Likes: 2
From: Berryville AR
Larry usually works every other Saturday. You can contact him as " Warrlord" on RMFTC.com. His workplace gives a discount to RMFTC members also. I think he does some small jobs on the side for friends, but not sure about a complete tranny build. And he is a real standup guy.
Thread Starter
|
Posting Guru
Joined: Sep 2008
Posts: 2,379
Likes: 2
Larry usually works every other Saturday. You can contact him as " Warrlord" on RMFTC.com. His workplace gives a discount to RMFTC members also. I think he does some small jobs on the side for friends, but not sure about a complete tranny build. And he is a real standup guy.
Trending Topics
Mountain Pass
Joined: Jun 2011
Posts: 225
Likes: 2
From: Berryville AR
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Elder User
Joined: Oct 2008
Posts: 550
Likes: 1
From: Colorado
my father inlaw is a transmission tech for ammco. He does a lot of tranny side work and is very brought up in performance upgrades. He races circle track cars and works there in springs. He is usually pretty reasonable if you let him take it home and build it at his shop at home. If you'd like his number I can give it to you.
Thread
Thread Starter
Forum
Replies
Last Post
Boostingaz
1967 - 1972 F-100 & Larger F-Series Trucks
5
Apr 6, 2018 07:56 PM
FrankOXO
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
Feb 28, 2017 06:45 AM
