2000 windstar 3.8 code p0171/p0174
Thread Starter
|
New User
Joined: Nov 2002
Posts: 4
Likes: 0
From: conroe usa
2000 windstar 3.8 code p0171/p0174
sorry i did not see anywhere else to post.
lean fuel indicated, fuel pressure good, no vacuum leaks found, all monitoring of system doesn't reveal anything unusual. reset ecu. has not reset today. ford dealer says intake bushings bad and need replaced. pcv seems good. o2 graphing crosses ok however more on the lean side percentage wise. freeze frame indicated code set at stand still and idling with engine temp at 145 degrees f. seems to be an intermediate problem.
lean fuel indicated, fuel pressure good, no vacuum leaks found, all monitoring of system doesn't reveal anything unusual. reset ecu. has not reset today. ford dealer says intake bushings bad and need replaced. pcv seems good. o2 graphing crosses ok however more on the lean side percentage wise. freeze frame indicated code set at stand still and idling with engine temp at 145 degrees f. seems to be an intermediate problem.
Thread
Thread Starter
Forum
Replies
Last Post
