BII 2.9 cleaned cat

Reply Subscribe

Thread Tools

Search this Thread

Apr 7, 2003 | 11:30 PM

fingerpie

Thread Starter

Freshman User

Joined: Mar 2003

Posts: 28

Likes: 0

BII 2.9 cleaned cat

What if any effect will it have on my BII if the cat has been cleaned out. E.g. will the exhaust pressure sensor need to be unplugged, will it run at all? The cat (was plugged) on my BII has been cleaned and now am unable to get the truck to start. Am going to install a direct fit when I get my TAX return but am curious if it is the CAT causing the no start at this point or possibly something else. Please get back to me if you have any helpfull info or if you have run a BII 2.9 with a cleaned cat successfully. Have replaced the following

- Fuel pressure regulator
- Ignition control modual
- Coil
- EGR
- EVR
- Plugs

Ran codes and get, a 21, 24, and 31!

HELP

thanks
Fingerpie

Last edited by fingerpie; Apr 7, 2003 at 11:35 PM.

Reply Subscribe