Rigid Industries
Thread Starter
|
Senior User
Joined: Aug 2011
Posts: 386
Likes: 0
Rigid Industries
Does anyone have an experience with products from Rigid Industries?
Ive been looking into lighting for the truck, and these guys seem like they have some pretty badass stuff. Pretty pricey though, but looking at some videos of their stuff, it seems worth it.
Im thinking either
Duallys (Set of two)
or
10" SR-Series Hybrid LED Light bar
Anybody?
Ive been looking into lighting for the truck, and these guys seem like they have some pretty badass stuff. Pretty pricey though, but looking at some videos of their stuff, it seems worth it.
Im thinking either
Duallys (Set of two)
or
10" SR-Series Hybrid LED Light bar
Anybody?
Thread Starter
|
Senior User
Joined: Aug 2011
Posts: 386
Likes: 0
They look super clean!
Ive been reading up on em and watching vids and im highly impressed. Totally submerged in water they still work, drug down the road they still work, beaten with a 2x4 still work, and im pretty sure theyre bullet proof.
Im thinking about mounting a bar where the factory fogs go. Or up in the grill area.
Ive been reading up on em and watching vids and im highly impressed. Totally submerged in water they still work, drug down the road they still work, beaten with a 2x4 still work, and im pretty sure theyre bullet proof.
Im thinking about mounting a bar where the factory fogs go. Or up in the grill area.
Senior User
Joined: Jan 2011
Posts: 103
Likes: 0
From: Waynesville, GA
defiantly the 10" light bar for the front I was thinking might fit / look good under the bumper on the valiance area ? or exactly where you talking about but mounted on the top of the area so it doesn’t interfere with the PS Cooler.
Thread Starter
|
Senior User
Joined: Aug 2011
Posts: 386
Likes: 0
10inch bar it is. Id like the 20inch but i cant shell out 520 bucks.
So either in between the factory fogs (take off the license plate)
Bottom of the ford logo in the grill, or above the ford logo in the grill.
OR i could get 2 6inch bars and put em on both sides of the grill, top, middle, or bottom.
What do you think?
So either in between the factory fogs (take off the license plate)
Bottom of the ford logo in the grill, or above the ford logo in the grill.
OR i could get 2 6inch bars and put em on both sides of the grill, top, middle, or bottom.
What do you think?
Thread Starter
|
Senior User
Joined: Aug 2011
Posts: 386
Likes: 0
So i did some measuring, and the E series 10 inch would fit perfectly in between the factory fogs. Width and height wise. 10" E-Series LED Light Bar 4wheelonline has em for 345 bucks with free shipping.
The E series 20inch would fill up that entire bottom area perfectly with taking out the fogs. Its 600-700 bucks..but it would look pretty damn sweet.
The license plate is gonna have to go in either case though which slightly worries me
The E series 20inch would fill up that entire bottom area perfectly with taking out the fogs. Its 600-700 bucks..but it would look pretty damn sweet.
The license plate is gonna have to go in either case though which slightly worries me
Thread
Thread Starter
Forum
Replies
Last Post
GRANT1978
1997 - 2006 Expedition & Navigator
7
Jan 4, 2011 10:56 AM
hokie93
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
2
May 19, 2010 03:43 PM
snipAR-15
1987 - 1996 F150 & Larger F-Series Trucks
26
May 10, 2009 03:49 AM
