Basic EFI questions
Thread Starter
|
Fleet Mechanic
Joined: Aug 2001
Posts: 1,526
Likes: 0
From: Round Rock, TX
Basic EFI questions
I don't know a whole lot about how the electronics of the EFI system work, so I've got a few basic questions.
If I want to change out the cam, or add headers, do I have to modify the computer in any way?
If I want to change out the cam, or add headers, do I have to modify the computer in any way?
Senior User
Joined: Mar 2002
Posts: 450
Likes: 0
From: Charter Oak, Iowa
Basic EFI questions
No. Component selection is critical tho. Utilize a cam specifically designed for the speed density system. (I'm assuming your talking about your '92 Bronco). My engine is speed density and runs great with all my mods. It is possible tho, that after your mods, that you might want to get a custom chip burned to maximize your return.
Randy
Randy
Thread Starter
|
Fleet Mechanic
Joined: Aug 2001
Posts: 1,526
Likes: 0
From: Round Rock, TX
Basic EFI questions
Yep, I need to rebuild the heads on the Bronco, so while I'm in there...
Thanks the the input. I'll keep that in mind if when I get around to the project this summer.
Thanks the the input. I'll keep that in mind if when I get around to the project this summer.
