80-86 Truck Parts - Free to a good home
#31
I have the stock cast iron intake of my 460 that came out of a 76 T-Bird. Can't imagine anyone wants or needs it but I guess you never know.
Will try and see if anyone needs it before I send it to scrap
Will try and see if anyone needs it before I send it to scrap
#35
Have several front end pieces to '86 F-150, gravel pan, grill mounts, believe I even have a grill. All would be painted flat black, grill has the emblem. May have some crystal clear turn signal lenses as well, hidden somewhere.
#36
Can I have the grille
#37
#38
I have an incomplete set of 1980-1986 F-series "brushed aluminum" moldings. The only one I don't have is the one for the right rear behind the rear wheel. In the picture there are three moldings missing. I still have the two that go in front of the rear wheels, they were still on my truck at the time of the picture. These moldings don't shine, they aren't perfect, and they have their fair share of wear. They are from a single cab long-bed truck, but only two of the moldings are 8' bed specific. Two others are single cab specific. Four of them should work on anything and everything including Broncos.
Whoever wants them can have them free of charge, just pay shipping.
I also have one 1980 only Trapezoid style molding that belongs in front of the rear wheel on a 6-3/4' bed. I only have this single molding. I can't use it since I have an 8' bed. This molding is free as well, you pay shipping.
Whoever wants them can have them free of charge, just pay shipping.
I also have one 1980 only Trapezoid style molding that belongs in front of the rear wheel on a 6-3/4' bed. I only have this single molding. I can't use it since I have an 8' bed. This molding is free as well, you pay shipping.
#40
Heck no!
These are my old moldings that originally came on my truck back in 1980. That one lone black/chrome molding is from my donor truck, I couldn't use it because I need the longer ones for the long bed.
You obviously don't know me too well. I don't give up when I want something. I searched for 8 months just for a Ranger Lariat radio bezel. Finally found one and had it shipped from Ohio.
These are my old moldings that originally came on my truck back in 1980. That one lone black/chrome molding is from my donor truck, I couldn't use it because I need the longer ones for the long bed.
You obviously don't know me too well. I don't give up when I want something. I searched for 8 months just for a Ranger Lariat radio bezel. Finally found one and had it shipped from Ohio.
#41
I'm gonna post this here, just so that they have a wider viewing audience.
Technically these are for a 94-96, however they can be used on any 1980-1996 D44 TTB front axle under a Bronco, F150, or even a Ranger/Bronco II/Explorer if you're running a D44 TTB.
They are stock 1994-1996 Steering knuckles. They utilize bolt on brake calipers, as well as have provisions for the front ABS sensor on trucks and Broncos equipped with 4WABS. They are great for a swap if you're sick of the slide pins in your older style brake calipers. I can't provide any info on that swap, just that these will work with any 1/2 ton D44 TTB axle. The reason they're free is simply because the spindles for these knuckles are beyond trashed due to people who just shouldn't work on vehicles. The knuckles are in great shape however, so no worries there. One thing to keep in mind is that the 1992-1996 trucks use 5 lug spindles instead of the 1980-1991 6 lug spindles. Therefore you will have to source a set of new spindles.
If you're interested, PM me. Just pay shipping and they're yours.
Technically these are for a 94-96, however they can be used on any 1980-1996 D44 TTB front axle under a Bronco, F150, or even a Ranger/Bronco II/Explorer if you're running a D44 TTB.
They are stock 1994-1996 Steering knuckles. They utilize bolt on brake calipers, as well as have provisions for the front ABS sensor on trucks and Broncos equipped with 4WABS. They are great for a swap if you're sick of the slide pins in your older style brake calipers. I can't provide any info on that swap, just that these will work with any 1/2 ton D44 TTB axle. The reason they're free is simply because the spindles for these knuckles are beyond trashed due to people who just shouldn't work on vehicles. The knuckles are in great shape however, so no worries there. One thing to keep in mind is that the 1992-1996 trucks use 5 lug spindles instead of the 1980-1991 6 lug spindles. Therefore you will have to source a set of new spindles.
If you're interested, PM me. Just pay shipping and they're yours.
#43
gear vendors unit
i have a gear vendors unit that ive taken off of a lightly used 1 ton ford its complete with all the wiring minus the adapter thats in good shape that id love to trade for an 80 to 83 ford parts truck with the 6cyl with all the duraspark ignition stuff on it....id even be interested in just swapping for the complete duraspark set up with carb...i hate to let this gear vendors just sit and collect dust when one of you guys could be using it.... call me anytime my names john barnett 806-567-2882 im in the amarillo texas area
#44
1985 Ford F250 Interior Parts
Pictures are posted in my garage
1) Dash Pad-Blue Mist Color-cracked and in very poor condition.
2) Door Panels-Drivers Side & Passenger Side-Blue Mist Color-manual everything-Arm Rest Pads included-Very Good Condition
3) Drivers side and Passengers Side kick panels-Blue mist Color-Good Condition except 5 1/4" Speaker cutouts in them
4) Both Door Sill Plates- Black- Good Condition
5) Rubber/Vinyl Floor Mat- Black- Very Good Condition-2wd, Auto
6) Cab/Door seals-Good Condition
7) Silver Weave Dash and Radio Bezels in excellent condition except dusty
8) under steering colume dash panel- Good condition except a hole for fog light switch.
Located in Olympia Washington- Might ship once I have my Pay Pal account set up to take the shipping cost payments.
e-mail if interested. All parts are free except shipping.
jacandjlo@yahoo.com
1) Dash Pad-Blue Mist Color-cracked and in very poor condition.
2) Door Panels-Drivers Side & Passenger Side-Blue Mist Color-manual everything-Arm Rest Pads included-Very Good Condition
3) Drivers side and Passengers Side kick panels-Blue mist Color-Good Condition except 5 1/4" Speaker cutouts in them
4) Both Door Sill Plates- Black- Good Condition
5) Rubber/Vinyl Floor Mat- Black- Very Good Condition-2wd, Auto
6) Cab/Door seals-Good Condition
7) Silver Weave Dash and Radio Bezels in excellent condition except dusty
8) under steering colume dash panel- Good condition except a hole for fog light switch.
Located in Olympia Washington- Might ship once I have my Pay Pal account set up to take the shipping cost payments.
e-mail if interested. All parts are free except shipping.
jacandjlo@yahoo.com
Last edited by JacandJlo; 09-17-2012 at 08:01 PM. Reason: Added details