help with wiring
Thread Starter
|
New User
Joined: Jun 2011
Posts: 6
Likes: 0
help with wiring
i have a 2wd 1974 f-150 that was converted into a f-350 4x4. my question is, recently i put a somewhat new 1984 motor because the other motor blew a head gasket, i finished putting the motor in and all the front water pump, fan,alternator,starter,power steering pump, etc... is all from the old motor. in my pictures i just missed the wiring for the alternator and now it won't charge my battery. i can't figure it out. i would like to know if anyone can show me the pictures of the wiring on theirs or if it is a problem with the alternator. thanks for anyone that helps me with this.
MSEE
Joined: Apr 2004
Posts: 10,386
Likes: 35
From: Austin, TX
No to which? No it does not have an ALT light, or no it does not have an ammeter? The wiring is set up completely different between the two, so anyone who is going to help has to know what you have first.
MSEE
Joined: Apr 2004
Posts: 10,386
Likes: 35
From: Austin, TX
Okay then, check out the picture in this thread: https://www.ford-trucks.com/forums/9...or-wiring.html
There will be nothing connected to the "I" terminal of your regulator.
There will be nothing connected to the "I" terminal of your regulator.
