I bet u can't help but look in here.
#3123
Our efforts haven't been appreciated since the great Australian Moderator Fredrian left us to go run IB, no more time for us peons
Plus I developed a habbit and had no money to do things to share and the great StG got teh ban hamma and there was a great exodus of knowledge after that.
#3125
2 questions...
Did the preacher call you Larry or Jay? Shouldnt you be consummating instead of posting on FTE?
The tech sticky was a waste of our time anyway. No one reads it and even if they did no one is doing anything more than 285s on a stock truck.
Did the preacher call you Larry or Jay? Shouldnt you be consummating instead of posting on FTE?
The tech sticky was a waste of our time anyway. No one reads it and even if they did no one is doing anything more than 285s on a stock truck.
#3128
2. Been doing that all dayyyy! unfortunately going to work tomorrow. leaving Wednesday afternoon for TN and then the real fun begins.
#3132
Congrats Larry, when's the first kid showin up ???
Been sitting since 97, with half a tank of gas, took the carb off and cleaned it and put new accelerator pump in. Dam thing runs good, fuel pump works, runs off the tan/brown gas that's in it, and smokes like its on fire at WOT. Funny tho, looks like a D44 REAR axle in it.
Been sitting since 97, with half a tank of gas, took the carb off and cleaned it and put new accelerator pump in. Dam thing runs good, fuel pump works, runs off the tan/brown gas that's in it, and smokes like its on fire at WOT. Funny tho, looks like a D44 REAR axle in it.
#3135
Funny u guys should say that, first glance I was like , D60LS, than I slid under it n nope. D44 LS. It has a powr lock or something in it. Both tires spin under power.
I have a D60, a 9 inch, and a 8.8 all in the box of the thing. The 9 is most likely going in it.
It also has a really goofy rear shackle. Part of it rests on the spring. There's a total of 3 bolts back there on each side. Ill have to take a pic. Lol.
I have 2 FE motors that I can rebuild for it, and make a sleeper out of it or something.
I have a D60, a 9 inch, and a 8.8 all in the box of the thing. The 9 is most likely going in it.
It also has a really goofy rear shackle. Part of it rests on the spring. There's a total of 3 bolts back there on each side. Ill have to take a pic. Lol.
I have 2 FE motors that I can rebuild for it, and make a sleeper out of it or something.