OLD DECODES
#166
Seems to me you asked for parts for a 1970 F750: Front fenders, inner fenders and a radiator support. You didn't mention your location, but I knew it was PA, cuz I looked at your profile.
Only a few of each of these parts were available, so...I listed what I could find...and where.
Dash pad in any color will be very hard to find, all are obsolete, AFAIK, not reproduced. I'll take a look-see for these other parts later today.
Only a few of each of these parts were available, so...I listed what I could find...and where.
Dash pad in any color will be very hard to find, all are obsolete, AFAIK, not reproduced. I'll take a look-see for these other parts later today.
#168
Hi Bill,
I'm looking for a tail gate reflector to a 2002 Lincoln Blackwood, passenger side.
Part # is 2C6Z-13A565-AA (or AB) but I'm not sure which is left or right. I need the passenger side.
I know the part is obsoleted. I'm trying to find dusty old stock somewhere.
Thanks for being here for us!
I'm looking for a tail gate reflector to a 2002 Lincoln Blackwood, passenger side.
Part # is 2C6Z-13A565-AA (or AB) but I'm not sure which is left or right. I need the passenger side.
I know the part is obsoleted. I'm trying to find dusty old stock somewhere.
Thanks for being here for us!
#169
F600 VIN Decode
I just bought a 1978 F600 Custom Cab dump truck with power steering and chrome grille. I'm interested in finding information from the data tag:
F61DCT27331
WB: 134
Color: T
Type: F611
Body: B8
Trans: 8
Axle: F31
Max GVW: 20200
D.S.O.: 11
Also, any idea where I can get the factory red vinyl & vinyl-weave bench seat material?
Thanks!
F61DCT27331
WB: 134
Color: T
Type: F611
Body: B8
Trans: 8
Axle: F31
Max GVW: 20200
D.S.O.: 11
Also, any idea where I can get the factory red vinyl & vinyl-weave bench seat material?
Thanks!
#170
Just got a dump truck given to me....
I have every Ford Truck Parts Catalog from 1928 thru 2001, so I can decode all the VIN info, codes from the Rating/Warranty Plates and the Certification Label first used in 1981.
If you need parts, obsolete or not, I can look up the numbers, then search for them on two online websites to see if anyone has them. Then will post the part numbers, sources that have them.
If the parts are still available, I will list the MSRP and the FTE member discount price offered by sponsor PARTSGUYED.COM (Ed Olson, parts manager of Horizon Ford in Seattle WA).
I've been doing this jazz on FTE since 11/04/2006. And, btw: One of the parts locator sites is only accessible to FoMoCo Dealers.
If you need parts, obsolete or not, I can look up the numbers, then search for them on two online websites to see if anyone has them. Then will post the part numbers, sources that have them.
If the parts are still available, I will list the MSRP and the FTE member discount price offered by sponsor PARTSGUYED.COM (Ed Olson, parts manager of Horizon Ford in Seattle WA).
I've been doing this jazz on FTE since 11/04/2006. And, btw: One of the parts locator sites is only accessible to FoMoCo Dealers.
Thanks and as soon as I get her home I will upload some pics... she has been in "barn storage".
#172
No FoMoCo dealer or obsolete parts vendor has either side.
#174
Thanks for the info Numberdummy, the truck is titled and was sold to me as a 1975 model. I used it for a few years, and sadly parked about 2-3 years ago. I have plans to revive it and put it back into service. It is a dump truck and is a BEAST!!!! I love and can't wait to get back on it. Thanks again for the info.
#176
BS: B = Light Blue / S = Bright Dark Blue Metallic.
U914 = LT900 (diesel), 44,800 lbs. GVWR
AE8: AE = Medium Gray Vinyl / 8 = Standard or Custom Cab without Butterfly Hood.
J = Fuller model RTO-9513 13 Speed Overdrive.
D8P:
D8 = Rockwell-Timken model SQHD Rear Axle w/Hendrickson Suspension / 4.88-1 / 38,000 lbs. Rear Axle Capacity.
P = Rockwell-Timken model FF-903 Front Axle with Power Steering / 12,000 lbs. Front Axle Capacity.
44,800 lbs. Gross Vehicle Weight Rating.
250623:
25 = Richmond VA Ford District Sales Office, where the original selling dealer ordered the truck from.
0623 = Domestic Special Order number: Your truck was ordered special by the original purchaser, not "bought off the lot."
#178
Thanks for checking for me, Bill! Sort of what I expected, and not what I wanted to hear, but I do appreciate you looking into it all the same.
#179
I just bought a 1978 F600 Custom Cab dump truck with power steering and chrome grille. I'm interested in finding information from the Warranty Plate:
F61DCT27331 / WB: 134 / Color: T / Type: F611 / Body: B8 / Trans: 8 / Axle: F31 / Max GVW: 20200 / DSO: 11
Also, any idea where I can get the factory red vinyl & vinyl-weave bench seat material?
smsautofabrics.com - located in Canby Oregon
F61DCT27331 / WB: 134 / Color: T / Type: F611 / Body: B8 / Trans: 8 / Axle: F31 / Max GVW: 20200 / DSO: 11
Also, any idea where I can get the factory red vinyl & vinyl-weave bench seat material?
smsautofabrics.com - located in Canby Oregon
The last 6 digits of the VIN (T27331) decodes to a 1974 F600 2WD / 1974 serial number range: S60,001-U80,000 / 1978 serial number range: AA5,001-CJ5,000.
1974 BODY code B8: B = Medium Blue Vinyl / 8 = Custom Cab.
There is no parts catalog reference for a 1974 F500/880 or 1978 F600/880 with the type of upholstery you have described. It's possible the seat is from a 1973/79 F100/350 Ranger.
*Compare the VIN on the Warranty Plate to the VIN on the registration/title to see if they match. Warranty Plate riveted to the left door face below the latch.
People replaced damaged left doors with used doors. 99.9% of the time, they failed to install the original Warranty Plates on the replaced doors.