8.8 Pattern Check (looking for input)
Thread Starter
|
New User
Joined: Aug 2009
Posts: 5
Likes: 0
8.8 Pattern Check (looking for input)
Greetings FTE, looking to get some feedback on this gear pattern for my 8.8 axle with 4.56's, any feedback would be much appreciated!
These are used gears (Unknown miles) setup is:
*backlash is set at 0.010*
*pinion shim is at 0.030 IIRC*
Coast:
Drive:
These are used gears (Unknown miles) setup is:*backlash is set at 0.010*
*pinion shim is at 0.030 IIRC*
Coast:
Drive:
Lead Driver
Joined: Nov 2002
Posts: 9,557
Likes: 44
From: Concord, NC
Thread Starter
|
New User
Joined: Aug 2009
Posts: 5
Likes: 0
Looks like the pinion is too close. http://www.ringpinion.com/Content/Bo...h_Patterns.pdf
