summit headees - do they have a O2 fitting???
Thread Starter
|
Senior User
Joined: Jan 2003
Posts: 404
Likes: 0
summit headees - do they have a O2 fitting???
i want to intstall summit headers and run 2 1/2 Y pipe into one 3 inch exhaust with a flow master and stock locations for the outlet. Do the summit headers have the O2 fitting or should i put the O2 right were the Y pipes come together??? What would give the computer the best reading of oxygen content???
Senior User
Joined: Aug 2001
Posts: 407
Likes: 0
From: New England
summit headees - do they have a O2 fitting???
I have used these headers on a couple of trucks. They have always been a good fit and depending on the year, they should have the O2 and/or the EGR fitting welded on them.
Freshman User
Joined: Sep 2002
Posts: 44
Likes: 0
From: Norfolk USA
summit headees - do they have a O2 fitting???
I just installed a set last weekend, but I bought a set of headman headers from Summit. They cost about 30 dollars more and they are stainless steel. They came with an O2 sensor tap on the passenger side and a plug if you decide to go with your stock "H" pipe. This is an awesome mod I am sure that you will be greatly impressed with the results. You might want to weld studs to a few of the header bolt so that you can still attach some of your hardware and do not skimp on your gaskets. I know that they will be provided, but 40 dollars will buy a nice set of reuseable alluminum gaskets and they are well worth the money.
Postmaster
Joined: Jun 1999
Posts: 2,719
Likes: 1
From: Lee's Summit MO
summit headees - do they have a O2 fitting???
I take it your going with the full lengths? The shorties, which is what I have, are just replacements for the manifolds. The 96+ apparently have the bolts for the O2 readouts on each side.
