55 F250 frame and bumper install problem
Thread Starter
|
Senior User
Joined: Jul 2009
Posts: 152
Likes: 1
From: Layton, Utah
55 F250 frame and bumper install problem
Hi All,
I'm back working on my 55 F250 after a year of the poor girl sitting. The PO hacked the forward frame and put fog lights in the cutouts in the lower radiator grill panel. I want to install a front bumper to be legal (so far safety inspectors did not reject it) and need to weld a mount back to the frame. Does anyone have a scaled sketch of the front bumper mount and dimension from the center line of the forward spring mount? Thanks in advance for any/all help.
I'm back working on my 55 F250 after a year of the poor girl sitting. The PO hacked the forward frame and put fog lights in the cutouts in the lower radiator grill panel. I want to install a front bumper to be legal (so far safety inspectors did not reject it) and need to weld a mount back to the frame. Does anyone have a scaled sketch of the front bumper mount and dimension from the center line of the forward spring mount? Thanks in advance for any/all help.
Phantom of the Phorum
Joined: Jan 2011
Posts: 5,472
Likes: 1,696
From: Kentucky
I did a drawing for Björn in another thread.
https://www.ford-trucks.com/forums/1...orns-56-a.html
https://www.ford-trucks.com/forums/1...orns-56-a.html
