Prepping to pull the head...
Thread Starter
|
Junior User
Joined: Mar 2011
Posts: 92
Likes: 0
Prepping to pull the head...
We got the cylinder 6 spark plug out. But, after breaking about 10 sockets and then rounding off the head of the EZOut that is in the cylinder 3 spark plug, I have given up hope.
How hard is it to get the head off, how much are head gaskets, anything I should know, etc etc etc.
Sincerely,
Pissed Off
How hard is it to get the head off, how much are head gaskets, anything I should know, etc etc etc.
Sincerely,
Pissed Off
Elder User
Joined: Aug 2010
Posts: 567
Likes: 1
From: Vancouver, WA
Pulling a head off is not difficult, just takes time. Gaskets are cheap,just make sure you buy an upper gasket set, some good silicone sealer. You will need a good torque wrench and scraper. Make sure all pushrods go back in the correct order as they came out. should be able to do this in an afternoon.
