2wd add a transfer case?
Thread Starter
|
Senior User
Joined: Apr 2011
Posts: 149
Likes: 0
From: Jackson,MN
2wd add a transfer case?
I love my truck even though it's a 2WD. I put in a eaton elocker with the 3.55 gears but I use it on the farm alot and to get moving with a 500 bushel wagon I need a little extra pull so I was either thinking of buying a 2speed box with really low gearing like 3.55 and 6somethings or put in a transfercase on my C6 just for the 4LO. What would be the cheaper route? If anybody knows where I can buy a add on in drive line box for cheap I would appreciate it or what it takes it to add a Tcase.
Lead Driver
Joined: May 2009
Posts: 6,807
Likes: 704
From: Tobyhanma, PA
Cheaper just to buy a 4wd. lol You can swap in a t-case but you'll need the t-case, a 4wd transmission (or the tailshaft for yours for a 4wd), the linkage, cab floor plate and a new rear driveshaft. I believe that's it for that lol.
What motor are you running? Maybe switching up to a 351w or a 460 would be better for you. 4wd isn't gonna help you pull if the torque isn't there.
Cheapest option is to regear for something like 4.11's or 4.10s.
What motor are you running? Maybe switching up to a 351w or a 460 would be better for you. 4wd isn't gonna help you pull if the torque isn't there.
Cheapest option is to regear for something like 4.11's or 4.10s.
