Good day all.

I have a stock 93' F250 ext with 4:10s and pull a 26ft 5400 lbs. trailer. I get where i want to go, but like everyone i want to get more pulling power to haul the trailer.

I know about the cam upgrades and headers, but not interested in going there right now.

I was wondering if just putting on a high-flow cat and muff would add enough low-end umph to help. I don't mind spending a 1000, but don't want to go more than that right now.

Would I notice it?
Any suggestions on something that i can order up and install with my bro?

 

with a 1000 you can get headers and the exhaust and still have a good deal of money left over.

 

what motor? auto tranny? the v8s have alot of aftermarket availibilty, such as msd ignition kits, headers, intakes, etc.

 

cat back won't give you much of a gain if you don't have Headers to increase flow out of engine... For $1000 I could get cam, headers, and exhaust!

For 351w:
Pacesetter Long Tubes (72C2221): $386 (amazon)
WALKER Part # 17312 : $267 (amazon)

total= $653

leaving $347 for new Y-pipe and cam kit...

 

If you have a 460 I would use these
Air Injection
Banks Power Gale Banks Engineering 49252 - Banks Ford 7.5L Stinger Systems - Overview - SummitRacing.com
or
Non air injection
Banks Power Gale Banks Engineering 49254 - Banks Power Gale Banks Engineering Exhaust Systems & Kits - Overview - SummitRacing.com

 

Thanks.....