EBPV Exaust Brake?
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 483
Likes: 1
From: Washington
EBPV Exaust Brake?
Im lookin at puttin a switch on my EBPV for an exaust brake. I searched a bit and couldnt find a good write up.
Just lookin for someone to point me in the right direction with a good link and/or good info on what im goin to need to get the job done.
Thanks in advance.
Just lookin for someone to point me in the right direction with a good link and/or good info on what im goin to need to get the job done.
Thanks in advance.
Post Fiend
Joined: May 2009
Posts: 5,470
Likes: 3
From: Pea Ridge, AR
Thread Starter
|
Senior User
Joined: Jun 2010
Posts: 483
Likes: 1
From: Washington
Yes that does help....so to be clear i cut both wires, route to a switch with power and then back to the EBPV? With a 10ohm resistor between the switch and the EBPV?
Looks like I need to find a write up on gettin a switch for my TC seein how I have an automatic!
Looks like I need to find a write up on gettin a switch for my TC seein how I have an automatic!
