Auto Hub Question
Thread Starter
|
Laughing Gas
Joined: Feb 2011
Posts: 991
Likes: 6
From: Newberry Springs, CA
Auto Hub Question
Hi again,
I checked out the tech threads for auto 4X4 hub maintenance. GREAT threads and I'll be doing it this weekend.
The one thing I couldn't find was anything about how to loosen up or lube the hub selector itself. I saw one that said something about drilling a hole in the switch, but other than that didn't find much.
So, once I get the hubs off and re-grease them is there anything I can do to loosen/lube the selectors?
BTW, may do a manual hub conversion somewhere down the road, but it's not in the cards right now.
Thanks!
I checked out the tech threads for auto 4X4 hub maintenance. GREAT threads and I'll be doing it this weekend.
The one thing I couldn't find was anything about how to loosen up or lube the hub selector itself. I saw one that said something about drilling a hole in the switch, but other than that didn't find much.
So, once I get the hubs off and re-grease them is there anything I can do to loosen/lube the selectors?
BTW, may do a manual hub conversion somewhere down the road, but it's not in the cards right now.
Thanks!
Lead Driver
Joined: Dec 2006
Posts: 7,092
Likes: 145
From: San Diego, CA
