When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi, Newbie here.
Anybody have any good or bad thoughts on a 08 F550? I'm going to put a rollback on it andit will need a PTO. Do any of you know where I could get a PTO for it and whats something like that cost?
Forgot to mention it's a 6 speed manual with a 6.4 TSD.
Last edited by Twilight Lumber Co; Mar 5, 2011 at 11:19 AM.
Reason: Left out info
first off i would put this post in the superduty section. second as long as it is a diesel you will be all right. i worked for a lumber yard up here for the last 10 years and we had a few of them. the gas v-10 is a waste of time and money but the diesel will go all day. you don't say if it will be 4x4 but that is what i recommend. also go with the 14 or 16 foot bed not shorter, and the electric hoists are cheap enough with a scissorlift.