oil pan help
Thread Starter
|
Senior User
Joined: Dec 2002
Posts: 297
Likes: 0
From: central pa
oil pan help
ok, its a 351 rear sump truck pan, but the dipstick tube screws into the left side of the pan. anybody have any idea's about what year its for. i need to get a dipstick tube for it
Laughing Gas
Joined: Apr 2001
Posts: 1,024
Likes: 0
From: Elon, NC
oil pan help
Define "left side". Do you mean driver's side? (which is where my dipstick is). Or do you mean through the timing cover on the front left hand side of the engine as you stand looking at the engine? I'm thinking you mean driver side since you said it screws in (same as mine). If that's right then the only aftermarket one I've found is made by Lokar.
www.lokar.com
My engine is a 79 so you could search for that year.
If you mean in front, then that is a press in tube. You can find those at any Advance Auto/Autozone, etc.
www.lokar.com
My engine is a 79 so you could search for that year.
If you mean in front, then that is a press in tube. You can find those at any Advance Auto/Autozone, etc.
Last edited by HotWhlz85; Mar 14, 2003 at 09:24 AM.
