When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Yeah and this summer I'm tearing apart my sled for 3rd time. Working on that is fun too
It'll get old eventually...trust me lol
I used to have 2 suzuki race quads and i was doing top ends pretty much once a month on one of them..then I started mulching transmissions, But i dont think you'll have any problems, i was pushing close to 60 horse outta a quad that comes stock with 36..
Now im more of a buy new (for really cheap) beat the crap out of it, and launch it while i still can kinda guy.
In other news: I finally installed the leveling kit on my truck, it now looks like im doing 90mph all the time. But it sits at about the same height as a leveled 350 now with the leveling kit installed and bigger tires
I used to have 2 suzuki race quads and i was doing top ends pretty much once a month on one of them..then I started mulching transmissions, But i dont think you'll have any problems, i was pushing close to 60 horse outta a quad that comes stock with 36..
Now im more of a buy new (for really cheap) beat the crap out of it, and launch it while i still can kinda guy.
In other news: I finally installed the leveling kit on my truck, it now looks like im doing 90mph all the time. But it sits at about the same height as a leveled 350 now with the leveling kit installed and bigger tires
Nice. And yeah im going to take it apart and replace all the lines in the coolant system, and have my friend do a compression test on it to see how it is. I think my snowmobile has 118 HP and 2700 miles
Hay guys I ran into a friend today that has a motor out of an 02 or 03 f250.
It is a 5.4 with about 85k on it, the tranny is shot but the motor is good.
He is look to get $3-400 for it.
oh, sorry. didnt mean the engine lol, i took the entire thing apart when i bought it because it was wrecked and a mess and then apart again last summer. but never did the coolant lines
Hay guys I ran into a friend today that has a motor out of an 02 or 03 f250.
It is a 5.4 with about 85k on it, the tranny is shot but the motor is good.
He is look to get $3-400 for it.
andy if i had some spare change i would pick that up so i could build it for the mustang. i will check with you in a couple months to see if he still has it
pics
rear suspension before:
after:
day i bought it, note hole in hood and left spindle was cracked and a arms bent:
rebuilding rear suspension:
and cleaner engine bay..
and first time it saw snow when i owned it:
i got it for $2500 with 550 miles and put about a grand into it. runs great and less problems then my dads ski doo he bought new
Hay guys I ran into a friend today that has a motor out of an 02 or 03 f250.
It is a 5.4 with about 85k on it, the tranny is shot but the motor is good.
He is look to get $3-400 for it.
hello! has wiring ? had ecu? everything i need to install?