Heads Questions
Thread Starter
|
Posting Guru
Joined: Sep 2008
Posts: 2,379
Likes: 2
Heads Questions
I am rebuilding my 92 F150 that has a 351W block in it. I am having trouble with a couple of things.
First, I need to maintain a compression ratio of about 9.0:1 or 9.1:1. So I am trying to find out what heads to buy. In order to do that, I need to know all of the numbers here: Engine Compression Ratio (CR) Calculator
I do know the first three but after that I am a little lost. I have the head gasket in hand but can't find the measurements. I also have the pistons but don't know what values to put in there.
Would someone with more experience be able to help me?
Thanks.
First, I need to maintain a compression ratio of about 9.0:1 or 9.1:1. So I am trying to find out what heads to buy. In order to do that, I need to know all of the numbers here: Engine Compression Ratio (CR) Calculator
I do know the first three but after that I am a little lost. I have the head gasket in hand but can't find the measurements. I also have the pistons but don't know what values to put in there.
Would someone with more experience be able to help me?
Thanks.
