Misc. drivetrain parts
Category: Drivetrain
Price: $400
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): '92+ Civic/EL & Del Sol, '06+ Civic/CSX, Prelude, Fit, S2000, CL, TL & Vigor, Hybrids
Item Condition: OH
Engine: Part suitable for gas truck
PM me, and I can try to txt photos. Stuff is all in my barn, on a concrete floor which has no lights.$400, will NOT separate anything related to this "lot", please don't ask.
390 Big Block FE, out of a 1970 F350. Claimed to be 325hp stock. Heads are off, but in good condition. Exhaust manifolds never came with the engine, sorry folks :\ Cyl walls might need honed, I can't tell for sure one way or another but everything feels tight otherwise. Will include the following:
-head gaskets (2)
-motorcraft 2bbl carb
-electronic ignition distributor (duraspark II)
-2wd C6 trans, appears to be in good shape. Input shaft has a new seal, so my guess would be recently rebuilt.
$250
31 spline Ford 9" rear axle from 78 bronco, bought in a set and do not need the rear
-NOT a nodular iron case, sorry folks :\
-3.55:1 gears, I believe ltd slip (posi)
-1 free rim with junk tire (will not separate lol)
$150, will separate heads from block ($75 for heads, $120 for block)
302 HO short block
- minus crankshaft (idk, got it that way at a yardsale)
- has both cyl heads, maybe an oil pan
Again, I won't separate any of the 390 stuff, and yes it's a 390 I measured the stroke. No REASONABLE offer will be turned down.
However, I am looking for an 80-86 standard cab Fseries pickup. 4x2/4x4 (gonna SAS it anyway), STD or auto doesn't matter, bigger the engine the better! Just looking for something to haul firewood with and beat around the woods...beaters are welcome, but I NEED a solid (but not flawless) cab and frame, please. Also searching for a set of 16"10,12,14") wheels, preferably steel.
Any other trades are OUT, $$$ only. Can't deliver, either. I'm just south of Zanesville, Ohio. Figured some western PA and WV guys might see this and be interested. Thanks guys!




