Two Problems I know you can fix.....
Thread Starter
|
Laughing Gas
Joined: Aug 2010
Posts: 852
Likes: 12
From: Kentucky
Two Problems I know you can fix.....
OK, if you have been following my nightmare NAV install then you know a little background on this....
1. The turnsignals blink at the "bulb out" rate whenever I activate them. But there is no bulb out. Both the left and right do this. But if I turn on the hazard lights, then they will blink normally. So driving down the road when I need to turn I just throw up the hazards and let the others play a little guessing game which way I'm turning..
2. After the failed NAV install, and reinstalliation (sp) of the old unit, my MIC for the phone or SYNC will not hear my voice. If I make a phone call over the radio of the truck, I can hear the other person but they can't hear me? Its like the MIC is disconnected, but its not, I think? ha.
RDenis has been a huge help to me so I wanted to give him a break and ask some others......
1. The turnsignals blink at the "bulb out" rate whenever I activate them. But there is no bulb out. Both the left and right do this. But if I turn on the hazard lights, then they will blink normally. So driving down the road when I need to turn I just throw up the hazards and let the others play a little guessing game which way I'm turning..
2. After the failed NAV install, and reinstalliation (sp) of the old unit, my MIC for the phone or SYNC will not hear my voice. If I make a phone call over the radio of the truck, I can hear the other person but they can't hear me? Its like the MIC is disconnected, but its not, I think? ha.
RDenis has been a huge help to me so I wanted to give him a break and ask some others......
Senior User
Joined: Nov 2010
Posts: 202
Likes: 0
From: Minneapolis, MN
Sorry not much help!
