GUAGE INSTALL??
Thread Starter
|
Senior User
Joined: Oct 2010
Posts: 217
Likes: 0
From: Rineyville, KY
GUAGE INSTALL??
I just got my isspro guages for christmas and I am getting ready to install them, and I need to know which wire to tap into at the headlight switch for the lights.
Thanks in advance for all the help.
Thanks in advance for all the help.
Post Fiend
Joined: Nov 2007
Posts: 9,549
Likes: 14
From: Payson, AZ
Edit: LT BLU/RED wire in the attached PDF. Dimmer switch on upper left of diagram.
Senior User
Joined: Apr 2006
Posts: 381
Likes: 0
Freshman User
Joined: Sep 2010
Posts: 42
Likes: 0
Here you go.
3-Gauge Install Pictures
3-Gauge Install Pictures
Cargo Master
Joined: Jan 2009
Posts: 2,800
Likes: 31
From: OKC, OK
When I did mine I had to set the light level on the led gauges all the way down and they are still brighter than the stock lights. I just did it by touching the wire to a ground source like the directions said. Didnt think I needed to hook it up permanently since it would always be at the lowest level. After I had the level set the dimmer in the truck does the rest.
