Heres the situation I purchased an 89 Ford F250 Inline 6cyl I was aware that a bolt was broken where the starter goes I didnt know they tried using an extraction bit and broke it as well. Now I was wondering If I could use a left handed Drill Bit and maybe that will back it off or should I go ahead and drill all the way through and re tap the hole?

Thanks

 

There are some times when I am happy to pay someone to do it. I believe the problem you mention is one of those times. I would drive it to my machine shop and unleash the big boys on it.

 

The Art of Extraction

 

if I only had a place out of the weather to work on it. I think someone has already broken a Extraction bit off in it. I cant even drill it out I called this guy hes gonna bring his torches up and work on it

 

got the transmission shop to remove the bolt.. got the starter on truck cranks but wont start? I think it may be the fuel since or maybe fuel pump Ill pull some lines tomorrow to see if im getting any fuel to the engine.

 

If you still have starting problems, start a new thread with a title reflecting that, OK? Thanks.