Motor pic
Elder User
Joined: May 2010
Posts: 957
Likes: 3
From: Valley Center, CA
This is a fine example of truck ****.
Very sweet looking engine. Picture is nice and clear and
sized well...some guys post massive photos you have to scroll
around to see...
Very sweet looking engine. Picture is nice and clear and
sized well...some guys post massive photos you have to scroll
around to see...
Trending Topics
Thread Starter
|
Senior User
Joined: Jan 2010
Posts: 398
Likes: 3
From: AR
D0VE-C with some port work by me, stock valves, Comp Magnum rocker arms
Comp Cams Xtreme 274,
Speed Pro hyper flat tops-compression in the 10s,
Yea, intakes an Air Gap RPM
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Thread Starter
|
Senior User
Joined: Jan 2010
Posts: 398
Likes: 3
From: AR
Think I'll try some more....
Thread Starter
|
Senior User
Joined: Jan 2010
Posts: 398
Likes: 3
From: AR
Had to add a dipstick hole to the used Moroso pan #20614.
Pan worked out perfect as far as clearance and drain plug location.
It makes for an 8qt. system.
The reason the exhaust ports don't look fresh is because I did the porting on the ex. years ago for my 429 84 Mustang project. Kept the heads when I sold the car & stored them until this project.
This go around I did some work near the valve seats.
