lowering the rear, will these work?
Thread Starter
|
Junior User
Joined: Feb 2003
Posts: 71
Likes: 0
From: cincinnati
lowering the rear, will these work?
i want to level the back out, this seems like the cheapest way to go?
whats involved in putting these on?
would this be the only part i would need?
do you think i should go 1, 1.5 or 2" based on where i'm at now?
whats involved in putting these on?
would this be the only part i would need?
do you think i should go 1, 1.5 or 2" based on where i'm at now?
Gone but not forgotten.
Joined: Jul 2001
Posts: 6,521
Likes: 2
lowering the rear, will these work?
I've never lowered a truck with schackles/hangers but I've heard it is a good way to do short drops. As for the size to use, when I lowered my Ranger, I started with a tape measure - turned out mine was almost dead level. I used springs to lower mine but that (3") may be too much for you. The installation should be easy - only 4 easy to reach bolts. See my gallery to see 3" drop.
See my gallery to see what 3" looks like. Good luck.
Dono
See my gallery to see what 3" looks like. Good luck.
Dono
Last edited by dono; Mar 1, 2003 at 03:47 PM.
