Here ya go. Another entry for the picture competition.

Auzzie 65 F350

351 Cleveland, 40 thou over, with 30 thou. offset grind on the 4MAB crank. 6" Forged, Chev. "Scat" H beam rods. "Precision" brand forged pistons, custom street/strip billet cam (.552 in. & .563 ex., dur.@ 0.50, 228 & 235 deg. lobe centers at max lift, 103 & 113). Ported, closed chamber "2V" heads, Manley springs, guide plates etc. Oversize valves but not as big as 4V valves. "Torque power" dual plane, air gap manifold with 700 DP holley on top. Numerous other bits and peices. Balanced and blueprinted. Short motor assembled by Marty White from "John White racing".

Seats out of an Auzzie, XG ute., V.I.P. steering wheel, Dakota Digital instruments.
Central locking, alarm, immobilizer, air cond, Radio/CD/bluetooth, 40 Channel CB, electric trailer brake controller,etc.

Powder coated bull bar, grille and headlight surrounds.
Old school Marshal 909 spot lights with 100 watt globes.
Powder coated 8 lug wheels.
Dana 70, 3.73 posi center, NP450 4 spd.

Hope you like her.

Cheers, Ron.
[IMG]file:///C:/Users/owner/AppData/Local/Temp/moz-screenshot-8.png[/IMG][IMG]file:///C:/Users/owner/AppData/Local/Temp/moz-screenshot-9.png[/IMG]

 

My 1992 F-150.....
300 I6/ 5 speed
167k miles
Clear Turn Signals, Smoked tail lights, Chrome trim over the wheels, Bed tarp, and Interior was swapped for the maroon......

-Wes

 

1996 F-150 L.C.

 

No fair....Yours should be in the sexy trucks section...

-Wes

 

Yeah - I've always thot Jase had a hot looking ride!

 

got some good competion here

 

Here is mine! Its got about 285,000 miles on the clock with the original drivetrain.

 

Nice an clean there TG.....I like the cupholder....but it looks brand new...

-Wes

 

Thanks Sidewinder. That cup holder is awesome, almost any size drink fits in it. Doesn't yours have a cupholder like that? I just realized that your is a 5 speed, so it has the smaller one.

 

i dont even have cup holders in my 94

 

Mine doesn't have ANYTHING....It's a Custom Edition...Barely has window cranks and starter switch (I could honestly see it having the bar to out in the bumper and crank it over).....Any ideas where I can get one of those?

Thanks Texas Guy-

-Wes

 

Does your seat have two bolts on the front of it? Thats what it mounts to.

 

i got that im going to do some junkyard hunting for cupholders

 

Nope...thinking bout using the center cap idea and some fiberglass to make some...

-Wes

 

that would look cool