Zone = 9 in Setup
Thread Starter
|
Cargo Master
Joined: Jan 2007
Posts: 2,243
Likes: 79
From: Roman Forest, TX
Zone = 9 in Setup
Hullo all. When I got my oil changed last time, I talked the dealer into updating my PCM program. I haven't noticed any real change yet, and I'm still waiting to see what happens on the regen (I haven't notice it going into regen yet either!). Anyway, I was playing with my dash settings, thinking there might be something new and exciting in there (there wasn't), and in the "Setup" menus, I ran across one that has "Zone = 9".
Okay, never mind...I found my own answer (RTFM!!). Still, I should be in Zone = 7.
So, for those who are too lazy to look it up (I almost was), This is a setting to help calibrate your compass. On page 134 of the Owner Guide, 4th Printing, It has a map of the US with the zones. Mine was set for Florida/Tennessee/Ohio and such. Interesting, as the truck came from Oklahoma before I got it. Must be the factory setting from the build plant (Kentucky??).
Oh, and it also has the calibration procedures there. Enjoy!
Okay, never mind...I found my own answer (RTFM!!). Still, I should be in Zone = 7.
So, for those who are too lazy to look it up (I almost was), This is a setting to help calibrate your compass. On page 134 of the Owner Guide, 4th Printing, It has a map of the US with the zones. Mine was set for Florida/Tennessee/Ohio and such. Interesting, as the truck came from Oklahoma before I got it. Must be the factory setting from the build plant (Kentucky??).
Oh, and it also has the calibration procedures there. Enjoy!
Thread
Thread Starter
Forum
Replies
Last Post
