I have a question about installing a class 3/4 hitch on my 78 F250 4x4. I have access to to used hitches, but do not know if they will fit. One is on a 67 F100 4x4, the other a 99 F250. My main concern is if they fir the frame width wise. I don'd mind drilling new mounting holes if required.

Thanks
Stacey

 

i dont know what the widths of the trucks are but try measuring the width of the frame rails and then the width of the hitches

 

I would measure them, but don't have access. That's why I was hoping someone here would know...

Thanks
Stacey