Manual swap
Thread Starter
|
More Turbo
Joined: Apr 2007
Posts: 572
Likes: 3
Manual swap
Its been awhile since I posted on here, been really busy, so I'm going to convert the 78 in my sig to a manual, and swap the motor out of the parts truck that I have access to.
The only problem that I see is that the truck that the manual is coming out of, it is a divorced mount transfer case, and my np203 is a married unit. I will have access to a 4 speed and transfer out of a 81 F150, which I am assuming is a t19, but will my 203 bolt up to the T19? Or would it be easier to swap the t-case out of the 81 f150?
Also, what about the cross members and drive shafts, are they much different between the 73-76, 77-79's and the 81 f150?
The only problem that I see is that the truck that the manual is coming out of, it is a divorced mount transfer case, and my np203 is a married unit. I will have access to a 4 speed and transfer out of a 81 F150, which I am assuming is a t19, but will my 203 bolt up to the T19? Or would it be easier to swap the t-case out of the 81 f150?
Also, what about the cross members and drive shafts, are they much different between the 73-76, 77-79's and the 81 f150?
