Originally Posted by
danspears1
Thanks for the clarification Stewart_H.
I need a diagram showing the location of the four check ***** on the calibration plate directly above the accumulator, not the plate above the main valve body. I was able to find that. For some reason, the instructions I found regarding removing/reinstalling the accumulator and plate do not mention the checkballs at all.
Please help me. I gotta get the X back on the road.
I had a similar experience with my 4R70 in my Mark VIII and the only way I found was to look for the shiney spots where the ***** seated. It worked for me, maybe I just got lucky.