Originally Posted by
Neal 97 250
Thanks Roland I understand it better now.
Basically what we are doing is just removing the cable from the lever on the tranny. Then cycling the tranny thru a couple of gears and reattaching it to the cable.
It should then be readjusted.
Do you think this can be done with no tools?
I would assume at a minimum some pliers would be useful. Sorry for the dumb questions, I don't have it in my posession right now to look at it and don't have my tools with me.
Pliers and a screwdriver should be all you'd need. The tab will release and allow for the "teeth" on the cable end to slide to a new position, if necessary, to adjust the length.