Thread
:
Concerned about my EOT/ECT spread after all the work Ive done
View Single Post
#
15
06-18-2014, 09:23 PM
bismic
Fleet Owner
Join Date: Nov 2003
Posts: 26,053
Likes: 3,022
Received 2,491 Likes on
1,728 Posts
I would verify the cold soak temps before worrying too much. If it is 12-13 degrees (at the proper test conditions), then that is not good, but it isn't a big enough problem to require immediate action.
Reply
Like
bismic
View Public Profile
Find all posts by bismic