Originally Posted by
graygt07
I have I believe the original springs and am looking to replace them. I want to know how much it will drop the back end with 3" drop leaf springs. I want to know if someone has newer rear springs on thiers and can give me a measurement to see how high stock is. Like a measurement from the rear fender to the floor. My truck could drop about 1" or 1 1/2" and still look ok. But if I have only lost 1/2" from original height I my have to figure something else out . Thanks
I can't find my original measurements but a couple of us have bought new springs from
Posie's in Hummelstown, PA. They make them in their spring shop outside of town. I put Dual Flex in the front and SuperSliders in the rear. This gave me a little less than a 3" drop on my F-2. Ignore the rear in the picture as I have P235x70R16 in the rear vs P215x60R16 in the front. I'm looking to replace the rear tires so it will bring it down closer to the front.