ok i see camo EVERYWHERE where i live but noone has camaro racing stripes i was wondering how to make the stencils ect it will going up the hood onto the roof and down the tail gate, also 01 will be on each door in camo and GENERAL LEE will be on the bottom of each door basicaly it would be the paint job i think it would be if Bo and Luke Duke had a 1993 F150 4x4
There should be a great selection of Camo vinyl you can just run up the hood, roof and tailgate. If you're wanting to do it with paint, I would go heavily involved. Lay out where you're going to paint and cover the rest with tape and plastic. Then pick your base color and paint the exposed area. Let it dry, wet sand it smooth. Then it's time to decide if you want patterns or blobs. You can lay down leaves and pine needles for patterns, or just cut free form circles with paper and paint them. Repeat for the third color and there after. Just sand smooth after every coat and apply clear coat when you're done.
Some of the rifle boards have great write ups on how to paint camo, everything from using natural shapes to "snake skin".