Hi IM new to this site but have spent alot of time on other forums

K my problem started today when i went to rewire my trailer lights and a few of myfuses were blown supplying power to the trailer .
Anyway got that done replaced the fuses and hooked up a trailer brake module or what ever you call it but its the ajustable trailer brake that i just pluged in .
So got it all done and went to start the truck and back it up to my camp trailer turned the key waited tell light went off and proceeded to turn the ke all lights went out like normal when you start a vehical . but nothing , not a click not a noise just plain wont turn over tried to jump it and checked every fuse and no problems
Anyone have any ideas . I was leaving to go to the sand dunes tonight and this is the only reason i am still home my dam truck will not start

 

Jump the solenoid with a screwdriver and see if she spins over. make sure the key is on first so that it will start when you do it.

Make sure that you are all the way into PARK. if the PCM does not see the trans in park or neutral, it will not start.

Oh, and Welcome to FTE!!!

 

Did you check the big fuses under the hood?